Popular Woodworking Magazine » Carl Bilderback http://www.popularwoodworking.com Woodworking advice, woodworking plans, woodworking projects and woodworking blogs Mon, 20 May 2013 23:04:27 +0000 en-US hourly 1 http://wordpress.org/?v=3.5.1 A Dance to Keep Your Stones Flathttp://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/a-dance-to-keep-your-stones-flat http://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/a-dance-to-keep-your-stones-flat#comments Fri, 15 Apr 2011 16:32:17 +0000 Christopher Schwarz http://www.popularwoodworking.com/?p=97352 Carpenter and woodworker Carl Bilderback never flattens his oilstones. And they are both dead flat – I couldn’t get a .00125” feeler gauge under a straightedge that I laid on the stones. His stones aren’t magic. He simply knows how to dance. The trick to keeping your stones flat is in how you hold the … Read more »

The post A Dance to Keep Your Stones Flat appeared first on Popular Woodworking Magazine.

]]> http://www.popularwoodworking.com/woodworking-blogs/chris-schwarz-blog/a-dance-to-keep-your-stones-flat/feed 7 Almost-forgotten Handsaw Trickshttp://www.popularwoodworking.com/articleindex/almost-forgotten-handsaw-tricks http://www.popularwoodworking.com/articleindex/almost-forgotten-handsaw-tricks#comments Wed, 16 Feb 2011 22:22:39 +0000 Article Index http://www.popularwoodworking.com/?p=56671
Almost-forgotten Handsaw Tricks

How to clear your line of sawdust without blowing yourself dizzy. Plus, learn how to mark accurate 90° and 45° lines without a square. By Carl Bilderback Pages: 64-65 From the October 2006 issue #157 Buy this issue now About 35 years ago I was using a handsaw in what I considered the usual method: … Read more »

The post Almost-forgotten Handsaw Tricks appeared first on Popular Woodworking Magazine.

]]> http://www.popularwoodworking.com/articleindex/almost-forgotten-handsaw-tricks/feed 0 Make Drift a Mythhttp://www.popularwoodworking.com/techniques/make-drift-a-myth http://www.popularwoodworking.com/techniques/make-drift-a-myth#comments Tue, 15 Feb 2011 22:48:02 +0000 Article Index http://www.popularwoodworking.com/?p=55141
Make Drift a Myth

You can tune up your band saw to resaw veneer without expensive fences or blades. By Carl Bilderback Pages: 66-67 From the August 2006 issue #156 Buy this issue now The subject most often written about in woodworking magazines is probably cutting dovetails. In second place – and not far behind – is likely resawing … Read more »

The post Make Drift a Myth appeared first on Popular Woodworking Magazine.

]]> http://www.popularwoodworking.com/techniques/make-drift-a-myth/feed 0 Perfect Patchinghttp://www.popularwoodworking.com/articleindex/perfect-patching http://www.popularwoodworking.com/articleindex/perfect-patching#comments Tue, 01 Feb 2011 14:21:58 +0000 Article Index http://www.popularwoodworking.com/?p=38881
Perfect Patching

A long-time carpenter shares a repair trick to hide the mistakes made by ham-handed apprentices. By Carl Bilderback Pages: 76-79 From the February 2008 issue #167 Buy this issue now For more than 30 years I was a traveling carpenter foreman in charge of installation of top-quality architectural woodwork and cabinetry. My job assignments were … Read more »

The post Perfect Patching appeared first on Popular Woodworking Magazine.

]]> http://www.popularwoodworking.com/articleindex/perfect-patching/feed 0 Fit Doors with Ticking Stickshttp://www.popularwoodworking.com/nov10/fit-doors-with-ticking-sticks http://www.popularwoodworking.com/nov10/fit-doors-with-ticking-sticks#comments Wed, 19 Jan 2011 00:27:18 +0000 Article Index http://www.popularwoodworking.com/?p=31891
Fit Doors with Ticking Sticks

A traditional trick used by carpenters can help you fit doors into almost any irregular opening. By Carl Bilderback Pages: 48-49From the November 2010 issue # 186 Buy this issue nowFitting inset doors into a face frame cabinet is a task that even veteran cabinetmakers would rather avoid. Unless the corners of the face frame are perfectly square, and the door’s rails and stiles are straight, the usual procedure is often time consuming and frustrating.You know the drill: Check all the corners of the face frame with your square, put a straightedge on the door’s rails and stiles to check for any humps or hollows. Typically you discover that the frame has some problems. So you make the door with enough extra length and width to allow for fitting the door to the frame. At this point there are different ways to advance the process, but the bottom line is that with enough trying and fitting with a handplane you end up with a door that fits the frame with a nice equal margin on all four sides – maybe.Some 25 or 30 years ago I read about a procedure usually used by carpenters called “The Ticking Stick Method” for fitting countertops and the like into spaces with irregular shapes and angles. This method is simplicity itself because it allows for a near-perfect fit using only a stick that has a long taper and a sharp point on one end, a piece of cardboard and a pencil. That’s right – no square, no sliding bevel and no tape measure is required.Although this article deals with fitting flush cabinet doors to the face frame, this system is adaptable to solve many other problems that you may encounter.Article: Read Carl Bilderback's article on how to install a Dutchman. Web site: Visit the web site of the Mid-West Tool Collectors Association. Video: Want more explanation of how ticking sticks work? Watch this free video from the editors. In our store: Our "Cabinetmaking Essentials" DVD will get you started building cabinets. Read more »

The post Fit Doors with Ticking Sticks appeared first on Popular Woodworking Magazine.

]]> http://www.popularwoodworking.com/nov10/fit-doors-with-ticking-sticks/feed 0