Tool Test: Clever Spyder Jigsaw Blades Make Super-tight Turns

03pwm1308tooltestBy Steve Shanesy
Page 16

Spyder, a Kansas City, Mo.-based company, has introduced a jigsaw blade with teeth on the front and back edges. At first glance, these blades look odd at best and gimmicky at worst. But after taking these blades for a test-drive, I began to understand the versatility offered by this innovation. Of course it’s possible to cut moving backward, but the bigger surprise is how tight of a radius cut you can make – less than 3⁄4″ in diameter.

The back teeth, as well as the narrow 3⁄16″ blade width, make those tight cuts possible by slightly opening the kerf without chewing up the surface.

If you’re wondering if the teeth positioned on the back edge of the blade gnaw on the jigsaw’s blade guide, they don’t – the teeth don’t reach the guide even with the blade fully retracted.

Cutting in reverse is a handy feature when you want to saw normally then change direction at an acute angle; obvious applications are operations you would otherwise do using a scrollsaw. But simple direction changes also make sawing away most of the waste in a dovetail much easier than when using typical jigsaw blades.

Read the full review here.

Video: See the Spyder double-sided jigsaw blade in action.

From the August 2013 issue #205
Buy the issue now
August_2013