<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=376816859356052&amp;ev=PageView&amp;noscript=1">
 In Featured Article

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Edited by Kari Hultman
Pages: 14-15

From the November 2011 issue #193
Buy this issue now

The limited crosscut capacity of my cabinet saw made it a challenge to cut wider boards, so I designed an infeed table that hangs on a wall when not in use and quickly and securely attaches to the front rail of my saw with Universal Fence Clamps (Rockler #31373).

To make the infeed table, use a piece of melamine or other stable material that measures approximately 12″ wide x 24″ long. Cut a lengthwise groove in the center of the board that matches the miter slots on your saw.

VIDEO: We film videos of many Tricks of the Trade in use in our shop, and post them online, free. >Visit popularwoodworking.com/tricks to watch.

WEB SITE: Visit the Tricks of the Trade page online.
BLOG: Tricks editor Kari Hultman writes about woodworking on her blog, The Village Carpenter.
IN OUR STORE: “601 Woodshop Tips & Tricks,” by Graham McCulloch.

From the November 2011 issue #193
Buy this issue now


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts

Start typing and press Enter to search