<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=376816859356052&amp;ev=PageView&amp;noscript=1">
 In Featured Article, Shop Blog

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

Last night I had a great time hanging out with the crew from the Modern Woodworker’s Association. We touched on everything from the direction of the magazine to the upcoming Woodworking in America Conferences to building big boats in small workshops and possible infractions of child labor laws. I also announced our upcoming November issue, the 200th issue of Popular Woodworking Magazine and a special issue devoted to some of the best and most noted makers working today, including a profile of Asheville chairmaker Brian Boggs, which I’m finishing up now. You’ll also find a great interview with Norm Abram as he reflects on life after the New Yankee Workshop, a visit and retrospective with the father of studio furniture Wendell Castle, and an introduction to Mary May, as fine a carver as there is working today. To mention but a few.

At any rate, take a look at the latest MWA show. And try the previous episode as well, which features Ron Hock, and learn a little  about what goes in to making a quality handtool. I did.  The Modern Woodworkers Association is a fine group of guys and doing their show was an honor and a lot of fun. Thanks MWA.

And for those of you who prefer to skip the video, here’s the audio version.

Matthew Teague


Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Recommended Posts
Comments
  • alicoh

    Boring!

Start typing and press Enter to search

Mixing finishes. Almost any finishing product can be applied over any other as long as the “other” is dry and the product you’re brushing doesn’t dissolve and smear the existing. I applied a water-soluble dye to this mahogany. Then I applied a thin shellac “washcoat” as a barrier so the water-based paste wood filler I used wouldn’t dissolve and smear the dye. After the filler dried, I brushed polyurethane. I alternated water-based, alcohol-based and mineral-spirits-based without any problems because each previous product was dry.