THE DUST EXTRACTOR

AS YOU SEE  THE ORDINARY WHEELIE BIN? A TOP OF A HENRY 2 SPEED HOOVER .? AND 2 INTERNAL HOLES CUT AT EACH SIDE OF BIN 6 INCHES DOWN FROM LID.AND  INVERTED WITH STAINLESS STEEL TUBE 2 3/4 DIAMETER WHICH YOU CANT SEE. THIS I HAVE ADAPTED TO FIT A 2 1/2 INCH HOSE WITH A THREAD ON THE END TO FIT S/STEEL INVERTED TUBE WHICH I MODIFIED.THE TOP OF BIN HAS BEEN CUT TO ADAPT THE HENRY HOOVER.WHICH HAS A TIGHT FIT.THE LID HAS MAGNETIC TAPE AROUND IT SO IT FITS NICE AND TIGHT.ALL ENDS OF HOSE I HAVE MADE VARIOUS OUTLETS TO FIT RADIAL SAW /CHOP SAW/ BAND SAW AND KITY 5 MACHINE CENTRE. .ALL I DO IS WHEEL BIN INTO WORK SHOP CONECT TO MACHINES OR IF ONE MACHINE I MADE A BUNG /PLUG TO FIT OVER ONE OF THE INVERTED TUBES.SO WHEEL INTO WORK SHOP PLUG IN CONECT HOSE TO A MACHINE AND AWAY WE GO. NO  SAW DUST  EXCEPT IN WHEELIE BIN.? WHEN FULL RELEASE LID AND TIP SAW DUST INTO THE GREEN RECYCLE BIN.THESE HENRY HOOVERS YOU CAN PICK UP ANYWHERE SECOND HAND FOR ABOUT 20 POUNDS OR YOUR MONEY 30 DOLLARS. THE BIN YOU MAY GET FREE OR YOU COULD BUY FROM YOUR LOCAL COUNCIL IN YOUR AREA. HOSES ARE CHEAP AS IS THE S/STEELTUBE.! ITS UNIQUE AND IT WORKS.. OR DO YOU WANT TO BUY AN EXPENSIVE DUST EXTRACTOR FOR YOUR HOME WORKSHOP.???THIS WILL COST YOU MAYBE 50 DOLLARS TO MAKE INCLUDING PARTS.