<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=376816859356052&amp;ev=PageView&amp;noscript=1">
 In Shop Blog

We may receive a commission when you use our affiliate links. However, this does not impact our recommendations.

If you love planes and hand tool woodworking, you will find this video quite interesting. It shows Matt Bickford, a Connecticut based plane maker, teaching how to make a reverse ogee with an ovolo moulding using wooden moulding planes.


Popular Woodworking

 

By registering, I acknowledge and agree to Active Interest Media's (AIM) Terms of Service and to AIM's use of my contact information to communicate with me about AIM, its brands or its third-party partners' products, services, events and research opportunities. AIM's use of the information I provide will be consistent with the AIM Privacy Policy.


Start typing and press Enter to search

Mixing finishes. Almost any finishing product can be applied over any other as long as the “other” is dry and the product you’re brushing doesn’t dissolve and smear the existing. I applied a water-soluble dye to this mahogany. Then I applied a thin shellac “washcoat” as a barrier so the water-based paste wood filler I used wouldn’t dissolve and smear the dye. After the filler dried, I brushed polyurethane. I alternated water-based, alcohol-based and mineral-spirits-based without any problems because each previous product was dry.